Serving Shelby, NC and 25 miles around
Free Estimates (704) 600-8146
Land Clearing in Polkville, NC
Service Area

Land Clearing in Polkville, NC

Serving Polkville · Cleveland County

Veteran-Owned Land Clearing for Polkville

Land clearing in Polkville usually means farmland and forest, the country NC 226 crosses in northwestern Cleveland County. Polkville itself covers about 1.9 square miles, and 516 people lived there at the 2020 census. The town sits about 1,083 feet up, with the South Mountains to the northwest. Fields left unmowed here go to brush, and the woods creep out over the fence lines.

We are based in Shelby, and Polkville sits about 10 miles north-northwest of us in a straight line. By road it is about 12 miles up NC 226, which leaves Shelby as Polkville Road. Farm fields along that highway suit bush hogging, and the woodlots between them suit forestry mulching. LDS Solutions is veteran owned and fully insured, and every estimate is free and done on site.

What We Do in Polkville

Free Estimate in Polkville

Tell us about your land and we’ll get right back to you.

How the land lies around Polkville

Three state highways meet in Polkville, with NC 226 through the center and NC 182 starting east toward Lincolnton. NC 10 also starts in town and runs north as Casar Road, toward Casar and South Mountains State Park. From Metcalf north, NC 226 is the South Mountain Scenery byway, designated for its views of the South Mountains. Northwest of town, NC 226 crosses those mountains on its way to Marion, 31 miles out.

USGS maps put the center of Polkville in the Upper First Broad River watershed, so runoff here reaches that river. USGS stream maps show Brushy Creek and Hinton Creek within about 3 miles of the town center. The county's 872 farms counted 18,817 acres of hay in 2022, more than any other single crop. Out SR 1372, northwest of town, the John Lattimore House was listed on the National Register in 1982.

Which state rules apply when you clear land near Polkville?

On a farm tract near Polkville, the first rule to check is how much ground a job opens up. Under G.S. 113A-57, disturbing more than one acre on a tract takes an approved erosion and sedimentation control plan. A drive cleared 20 feet wide and 1,000 feet back from NC 182 opens almost half an acre. We measure the ground a job will disturb at the free estimate, before any date is set.

Under G.S. 87-122, NC 811 gets three full working days of notice before we dig for a culvert or stump. Burning brush near Polkville's woodlots brings in a second agency, the NC Forest Service. A fire lit from midnight to 4 p.m. in or within 500 feet of protected woodland needs its permit. Our forestry mulcher grinds brush where it stands and grapple trucks haul off logs, so many jobs skip burning.

What does a new drive off NC 226 near Polkville take?

All three highways that meet in Polkville are state roads, and under G.S. 136-93 NCDOT has complete control over them. NCDOT's driveway access policy says a permit is normally not required for a single residence. It still encourages you to contact the District Engineer about safety and design issues and the driveway pipe. For a single-family home, NCDOT installs the ditch pipe at its own expense once you buy and deliver it.

The policy calls for at least 20 feet of that pipe. Its inside diameter is 15 inches or more unless the District Engineer directs otherwise. Behind the ditch, we clear and grade the drive path, and that ground counts toward the one-acre line. Your supplier delivers the stone, and we spread and compact it as part of our gravel driveway work. At the estimate we look at where the drive will meet the highway and where water crosses it.

Communities & areas we serve around Polkville: Brushy Creek, Hinton Creek, First Broad River, Casar, Metcalf, NC 10 (Casar Road).

Polkville ZIP codes served: 28136, 28150, 28090.

View Polkville, NC on Google Maps

Serving Polkville & nearby

Free, no-obligation estimates throughout Cleveland County.

(704) 600-8146
Our Services in Polkville

The Same Services, Close to Home

Forestry Mulching in Shelby, NC

Forestry Mulching

Forestry mulching grinds brush and small trees into a mulch layer where they stand. Nothing gets hauled off and nothing gets burned.

Bush Hogging in Shelby, NC

Bush Hogging

Bush hogging for fields, pastures and overgrown lots around Shelby, NC. Our rotary cutters take down waist high growth, briar and small saplings, and put the ground back in shape.

Tree Removal in Shelby, NC

Tree Removal

Tree removal in Shelby, NC for leaning, dead and storm-downed trees. We drop them with machines and haul the wood off.

Stump Grinding in Shelby, NC

Stump Grinding

We grind stumps below grade so the spot can be mowed and seeded. When the ground has to be build-ready, we pull the stump and its roots out.

Grading & Leveling in Shelby, NC

Grading & Leveling

Land grading in Shelby, NC. We cut, fill and compact so your yard, pad or gravel drive sits flat and sheds water instead of holding it.

Excavation in Shelby, NC

Excavation

Excavation around Shelby, NC. Footings, driveway culverts, drainage trenches, pond banks and site prep, with the spoil hauled off in our grapple trucks.

Reviews

What Our Clients Say

Straight from the landowners we've cleared, graded and dug for.

See Our Work
Highly recommend Dewey and the team at LDS Solutions! They have done phenomenal work for us at Wallace Haven LLC clearing downed and dying trees, cleaning up overgrown areas, and helping transform our property. They've been dependable, hardworking, professional, and easy to work with from start to finish.
Tim WallaceGoogle review
We couldn't be happier with the work this crew did on our property! They handled land clearing, forestry mulching, brush hogging, and even some skid steer and excavator work. The land clearing and mulching made such a huge difference; it looks like a whole new space now. We'll definitely be using them again!
Katie BradleyGoogle review
Hurricane Helene took down many of our trees, preventing us from enjoying our space by the creek. These folks came, developed a plan, reviewed it with me, provided a fair price, and restored my access to the woods and creek. They also left the property spotless once the project was completed. CLEAN!
Kyle KiserGoogle review
Dewey came to my home in Shelby. He used his forestry mulcher and cleared my back yard and fence line. He also removed all the roots and vines running up on my house. Before, I could not see my fence or shed. I recommend anyone to use him and his services.
Richard HughesShelby, NC
I fought a yard slope for our above ground pool for a few years now. Dewey showed up and solved it all within a day and the grading is top notch. 100% recommended!
Zach BridgesGoogle review
Dewey forestry mulched for 11 days. They also excavated and dug out two 24 inch culvert pipes to allow us access on land. Amazing job, highly recommended to anyone needing work done! On time every day and under budget!
KGS PlantsGoogle review
These guys do great work at a great price! Thank you!
Richard CalhounGoogle review
Polkville FAQ

Questions From Polkville Property Owners

A few of the questions we hear most around Polkville. Don't see yours? Call us and ask.

Call (704) 600-8146

How far out from Polkville do you work?
We work about 25 miles around our Shelby base, which reaches well past Polkville on every side. That takes in land up NC 10 toward Casar and out SR 1372 past the John Lattimore House. Lawndale sits about 4.6 miles east of Polkville, and Fallston and Belwood about 8 miles out.
Can you clear land that runs down to Brushy Creek or Hinton Creek?
Yes, tracts along Brushy Creek, Hinton Creek and the First Broad River are inside our range. Near the water, we plan erosion control before the grading starts. Ditching and erosion control are part of our dirt work. If the job disturbs more than one acre, the approved plan under G.S. 113A-57 comes first.
Which services fit a farm tract near Polkville?
Bush hogging and forestry mulching fit most of the farmland and forest along NC 226. County farms held 33,513 acres of pasture in 2022, and bush hogging keeps pasture from going back to briars. A house site off NC 182 or NC 10 adds tree removal, stump grinding and grading for the pad.
Which ZIP codes cover Polkville?
Mostly 28150, with smaller pieces in 28136 and 28090. By the Census Bureau's 2020 ZIP code areas, 28150 takes in about 93 percent of the land inside town limits. Another 4 percent sits in 28136, a ZIP area that lies wholly inside Polkville. All three ZIPs fall inside the 25 miles we work around Shelby.
Nearby

We Also Serve

Ready to Start Your Project?

Get In Touch With LDS Solutions

Land to clear, a field to mow, trees down from a storm, or a building that needs to come down? Call or send the form. We come look at the ground in person and the estimate is free. We clear land. You build dreams.

Get a Free Estimate

Tell us about your land and we’ll get right back to you.

Call (704) 600-8146